Having hot water system issues? If your hot water isn’t working, it can be difficult to pinpoint where the issue is. Having a licensed plumber do hot water repairs for you is recommended, not only to minimise the downtime of your plumbing systems, but also to ensure that the issue is dealt with quickly and with minimal damage to the rest of your plumbing. But if you’re wanting to figure out what exactly is causing your hot water to malfunction, it can help to have some expertise from our licensed plumbers to shed some light on your hot water issues.

The heating elements are broken or worn-out

One of the usual reasons why your hot water is not working is if the electric elements in the water tank are broken or worn, which affects its ability to effectively heat the water inside of the tank in a timely manner. If this is the case, you may need to repair or install new heating elements to make your hot water system usable.

Problems with your energy supply

Check to see if your switches have tripped or if it has been turned off. Blown fuses are a pretty common issue that can make you think that you require hot water repairs. If it is turned off and continues to turn itself off in the time after, it is a good idea to get an electrician to take a look at your circuit board and diagnose faulty wiring. A fuse may have blown if the switch is on the on position and yet there is no energy getting through to the hot water system.

You’ve got a faulty thermostat

The thermostat provides information to the heating elements when to start heating up the water as it monitors the temperature of the water inside the tank. If the thermostat in your electric hot water system is not working the way that it should, however, you could be dealing with water that’s either too hot or too cold, both of which are not ideal for day-to-day use. Check to see if you’ve got a faulty thermostat by comparing the temperature of the dispensed water to the gauge that’s attached to your hot water system.

Water leakage

Inspect your water tank: if there is a lot of water pooling around your electric hot water system, this leakage may be the problem. Turn off your electric hot water system from the switchboard and call a licensed plumber for Perth hot water system repairs, as working with electricity and water can be potentially dangerous and needs an expert for appropriate solutions.

Your system has died of old age

While most hot water systems nowadays are built to last for a set amount of years, it’s important to note that devices that go past their prime can and do tend to malfunction or stop working completely. Over time, decreased performance can indicate that old age and regular use has dwindled the longevity of your hot water system, and this may mean that you do not need Perth hot water repairs, but rather, a new installation of a new hot water system. This is why it is important to have regular inspections done by a local, reliable plumber.